• (Khác biệt giữa các bản)
    Hiện nay (22:44, ngày 23 tháng 8 năm 2013) (Sửa) (undo)
     
    (3 intermediate revisions not shown.)
    Dòng 2: Dòng 2:
    {{Phiên âm}}
    {{Phiên âm}}
    == Kinh tế ==
    == Kinh tế ==
    -
    =====trai ao hồ=====
    		+
    // E-Branch 2
    -
    [[Thể_loại:Kinh tế ]][[Thể_loại: Tham khảo chung ]]
    		+
    conf t
    -
    192.135.250.2 = Packets routed = A metric is a =
    		+
     
    -
    172.16.4.0/22 = R2#router rip + default + ip route S0/0/1
    		+
    hostname EB2
    -
    192.168.0.192/27 = Add a clock rate = No static route =
    		+
     
    -
    The route will be + A static route will =
    		+
    enable secret class
    -
    The 172.30.0.0/16 = privileged EXEC = Flash Memory + TFTP server =
    		+
     
    -
    The 192.168.4.0 = The login command = split horizon =
    		+
    line console 0
    -
    Issue the no = It forwards packets = R2# configure terminal +
    		+
     
    -
    R2(config)# router rip + R2(config-router)# passive-interface FastEthernet0/0 = console = RIP uses only = Router(config-if)# ip address 192.168.2.1 255.255.255.0 =
    		+
    password cisco
    -
    ip route 0.0.0.0 0.0.0.0 Fa0/1 + ip route 0.0.0.0 0.0.0.0 10.1.1.1
    		+
     
    -
    It is the number = It forwards data + It acts as =
    		+
    login
    -
    route to 10.1.0.0/22 = a modem + a CSU/DSU device =
    		+
     
    -
    Blank 3 is the letter C + Blank 1 is the command show ip route + Blank 2 is the number 120 = The route is a candidate = access =
    		+
    exit
    -
    The router first = The static route for 192.168.2.0 =
    		+
     
    -
    loading the bootstrap = split horizon + hold-down timers
    		+
    line vty 0 4
    -
    router = NetworkA 192.168.1.0/26 = cisco = IP 172.16.32.18 =
    		+
     
    -
    They can be + They can forward = Locate and load = V.35 cable =
    		+
    password cisco
    -
    192.168.2.0/24 is missing from the routing table of R1 + 192.168.1.0/24 is missing from the routing table of R2 =
    		+
     
    -
    The serial interface + Three network = It excludes subnet =
    		+
    login
    -
    host B = A network is converged after = Change the IP = B, D =
    		+
     
    -
    the IP address of the S0/0/0 interface at R1 =
    		+
    exit
    -
    10.0.0.0/8 + 192.168.2.0/24 = 5 = Router(config)# hostname Admin
    		+
     
    -
    Admin(config)# enable secret cangetin
    		+
    banner motd %Authorized access only!%
    -
    Admin(config)# interface fa0/0
    		+
     
    -
    Admin(config-if)# ip address 192.168.1.22 255.255.255.248 =
    		+
    int f 0/0
    -
    SCCS* 172.16.1.0 -> S0/0/0 = It is the administrative =
    		+
     
    -
    192.168.1.1 = router = 198.18.48.0/21
    		+
    ip add 192.168.1.1 255.255.255.192
     +
     
     +
    no sh
     +
     
     +
    int f 0/1
     +
     
     +
    ip add 192.168.1.65 255.255.255.192
     +
     
     +
    no sh
     +
     
     +
    int s0/0/0
     +
     
     +
    ip add 192.168.1.254 255.255.255.252
     +
     
     +
    no sh
     +
     
     +
    int s0/0/1
     +
     
     +
    ip add 192.168.1.246 255.255.255.252
     +
     
     +
    no sh
     +
     
     +
    exit
     +
     
     +
    do sh ip int br
     +
     
     +
    do sh ip ro
     +
     
     +
    do show interfaces
     +
     
     +
    do show cdp neighbors
     +
     
     +
    do show ip route
     +
     
     +
    router eigrp 100
     +
     
     +
    network 192.168.1.0 0.0.0.63
     +
     
     +
    network 192.168.1.64 0.0.0.63
     +
     
     +
    network 192.168.1.252 0.0.0.3
     +
     
     +
    network 192.168.1.244 0.0.0.3
     +
     
     +
    no auto-summary
     +
     
     +
    passive-interface fa0/0
     +
     
     +
    passive-interface fa0/1
     +
     
     +
    interface s0/0/0
     +
     
     +
    bandwidth 384
     +
     
     +
    int s0/0/0
     +
     
     +
    ip summary-address eigrp 100 192.168.1.0 255.255.255.128 5
     +
     
     +
    int s0/0/1
     +
     
     +
    ip summary-address eigrp 100 192.168.1.0 255.255.255.128 5
     +
     
     +
    exit
     +
     
     +
    do telnet 192.168.1.253
     +
     
     +
    cisco
     +
     
     +
    en
     +
     
     +
    class
     +
     
     +
    // EastHQ
     +
     
     +
    configure terminal
     +
     
     +
    interface serial0/0/0
     +
     
     +
    ip address 192.168.1.249 255.255.255.252
     +
     
     +
    no sh
     +
     
     +
    interface serial0/0/1
     +
     
     +
    ip address 192.168.1.253 255.255.255.252
     +
     
     +
    bandwidth 384
     +
     
     +
    no sh
     +
     
     +
    interface serial0/1/0
     +
     
     +
    ip address 209.165.201.6 255.255.255.252
     +
     
     +
    no sh
     +
     
     +
    interface serial0/1/1
     +
     
     +
    ip address 192.0.2.2 255.255.255.252
     +
     
     +
    no sh
     +
     
     +
    exit
     +
     
     +
    do sh ip ro
     +
     
     +
    ip route 172.16.100.0 255.255.255.0 192.0.2.1
     +
     
     +
    ip route 0.0.0.0 0.0.0.0 serial0/1/0
     +
     
     +
    do show ip route
     +
     
     +
    router eigrp 100
     +
     
     +
    network 192.168.1.248 0.0.0.3
     +
     
     +
    network 192.168.1.252 0.0.0.3
     +
     
     +
    no auto-summary
     +
     
     +
    interface s0/0/1
     +
     
     +
    bandwidth 384
     +
     
     +
    router eigrp 100
     +
     
     +
    redistribute static
     +
     
     +
    exit
     +
     
     +
     
     +
    // E-Branch1
     +
     
     +
    configure terminal
     +
     
     +
    router eigrp 100
     +
     
     +
    network 192.168.0.0 0.0.0.127
     +
     
     +
    network 192.168.0.128 0.0.0.127
     +
     
     +
    network 192.168.1.248 0.0.0.3
     +
     
     +
    network 192.168.1.244 0.0.0.3
     +
     
     +
    no auto-summary
     +
     
     +
    passive-interface fa0/0
     +
     
     +
    passive-interface fa0/1
     +
     
     +
    exit
     +
     
     +
    int s0/0/0
     +
     
     +
    ip summary-address eigrp 100 192.168.0.0 255.255.255.0 5
     +
     
     +
    int s0/0/1
     +
     
     +
    ip summary-address eigrp 100 192.168.0.0 255.255.255.0 5
     +
     
     +
    exit
     +
     
     +
     
     +
    // EPC 2
     +
     
     +
    192.168.0.254 255.255.255.128
     +
     
     +
    Default gateway 192.168.0.129
     +
     
     +
    // EPC 4
     +
     
     +
    192.168.1.126 255.255.255.192
     +
     
     +
    Default gateway 192.168.1.65

    Hiện nay

    /Phiên âm này đang chờ bạn hoàn thiện/

    Kinh tế

    // E-Branch 2

    conf t

    hostname EB2

    enable secret class

    line console 0

    password cisco

    login

    exit

    line vty 0 4

    password cisco

    login

    exit

    banner motd %Authorized access only!%

    int f 0/0

    ip add 192.168.1.1 255.255.255.192

    no sh

    int f 0/1

    ip add 192.168.1.65 255.255.255.192

    no sh

    int s0/0/0

    ip add 192.168.1.254 255.255.255.252

    no sh

    int s0/0/1

    ip add 192.168.1.246 255.255.255.252

    no sh

    exit

    do sh ip int br

    do sh ip ro

    do show interfaces

    do show cdp neighbors

    do show ip route

    router eigrp 100

    network 192.168.1.0 0.0.0.63

    network 192.168.1.64 0.0.0.63

    network 192.168.1.252 0.0.0.3

    network 192.168.1.244 0.0.0.3

    no auto-summary

    passive-interface fa0/0

    passive-interface fa0/1

    interface s0/0/0

    bandwidth 384

    int s0/0/0

    ip summary-address eigrp 100 192.168.1.0 255.255.255.128 5

    int s0/0/1

    ip summary-address eigrp 100 192.168.1.0 255.255.255.128 5

    exit

    do telnet 192.168.1.253

    cisco

    en

    class

    // EastHQ

    configure terminal

    interface serial0/0/0

    ip address 192.168.1.249 255.255.255.252

    no sh

    interface serial0/0/1

    ip address 192.168.1.253 255.255.255.252

    bandwidth 384

    no sh

    interface serial0/1/0

    ip address 209.165.201.6 255.255.255.252

    no sh

    interface serial0/1/1

    ip address 192.0.2.2 255.255.255.252

    no sh

    exit

    do sh ip ro

    ip route 172.16.100.0 255.255.255.0 192.0.2.1

    ip route 0.0.0.0 0.0.0.0 serial0/1/0

    do show ip route

    router eigrp 100

    network 192.168.1.248 0.0.0.3

    network 192.168.1.252 0.0.0.3

    no auto-summary

    interface s0/0/1

    bandwidth 384

    router eigrp 100

    redistribute static

    exit


    // E-Branch1

    configure terminal

    router eigrp 100

    network 192.168.0.0 0.0.0.127

    network 192.168.0.128 0.0.0.127

    network 192.168.1.248 0.0.0.3

    network 192.168.1.244 0.0.0.3

    no auto-summary

    passive-interface fa0/0

    passive-interface fa0/1

    exit

    int s0/0/0

    ip summary-address eigrp 100 192.168.0.0 255.255.255.0 5

    int s0/0/1

    ip summary-address eigrp 100 192.168.0.0 255.255.255.0 5

    exit


    // EPC 2

    192.168.0.254 255.255.255.128

    Default gateway 192.168.0.129

    // EPC 4

    192.168.1.126 255.255.255.192

    Default gateway 192.168.1.65

    Lấy từ « http://tratu.soha.vn/dict/en_vn/Cisco »

    tác giả


    Tìm thêm với Google.com :

    NHÀ TÀI TRỢ
Mời bạn chọn bộ gõ Anh Việt
Bạn còn lại 350 ký tự.
X