• (Khác biệt giữa các bản)
    Hiện nay (22:53, ngày 23 tháng 8 năm 2013) (Sửa) (undo)
     
    Dòng 14: Dòng 14:
    :[[course]] , [[period]] , [[quarter]] , [[session]]
    :[[course]] , [[period]] , [[quarter]] , [[session]]
    [[Thể_loại:Thông dụng]][[Thể_loại:Từ điển Oxford]][[Thể_loại: Tham khảo chung ]]
    [[Thể_loại:Thông dụng]][[Thể_loại:Từ điển Oxford]][[Thể_loại: Tham khảo chung ]]
     +
     +
    US-R2 (config)# int Fa0/0
     +
     +
    US-R2 (config-if)# ip add 192.168.20.65 255.255.255.224
     +
     +
    US-R2 (config-if)# no shut
     +
     +
    US-R2 (config-if)# exit
     +
     +
    US-R2 (config)# int Fa0/1
     +
     +
    US-R2 (config-if)# ip add 192.168.20.113 255.255.255.248
     +
     +
    US-R2 (config-if)# no shut
     +
     +
    US-R2 (config-if)# exit
     +
     +
    US-R2 (config)# int S0/0/0
     +
     +
    US-R2 (config-if)# ip add 192.168.20.242 255.255.255.252
     +
     +
    US-R2 (config-if)# no shut
     +
     +
    US-R2 (config-if)# exit
     +
     +
    US-R2 (config)# int Lo0
     +
     +
    US-R2 (config-if)# ip add 172.16.0.2 255.255.255.255
     +
     +
    US-R2 (config-if)# no shut
     +
     +
    US-R2 (config-if)# exit
     +
     +
    Configure US-PC2 with the last IP address in the subnet.
     +
     +
    Ip address: 192.168.20.94Subnet mask: 255.255.255.224Default gateway: 192.168.20.65
     +
     +
    US-R1 (config)# int Fa0/1
     +
     +
    US-R1 (config-if)# ip add 192.168.20.118 255.255.255.248
     +
     +
    US-R1 (config-if)# no shut
     +
     +
    US-R1 (config-if)# exit
     +
     +
    US-R1# telnet 192.168.20.245
     +
     +
    HQ(config)# ip route 10.10.0.0 255.255.252.0 128.107.25.2
     +
     +
    HQ(config)# ip route 0.0.0.0 0.0.0.0 S0/1/0
     +
     +
    HQ(config)# router ospf 3
     +
     +
    HQ(config-router)# network 192.168.20.244 0.0.0.3 area 0
     +
     +
    HQ(config-router)# network 192.168.20.240 0.0.0.3 area 0
     +
     +
    US-R1 (config)# router ospf 3
     +
     +
    US-R1 (config-router)# network 192.168.20.0 0.0.0.63 area 0
     +
     +
    US-R1 (config-router)# network 192.168.20.112 0.0.0.7 area 0
     +
     +
    US-R1 (config-router)# network 192.168.20.244 0.0.0.3 area 0
     +
     +
    US-R2 (config)# router ospf 3
     +
     +
    US-R2 (config-router)# network 192.168.20.64 0.0.0.31 area 0
     +
     +
    US-R2 (config-router)# network 192.168.20.112 0.0.0.7 area 0
     +
     +
    US-R2 (config-router)# network 192.168.20.240 0.0.0.3 area 0
     +
     +
    HQ(config-router)# passive-interface s0/1/0
     +
     +
    HQ(config-router)# passive-interface s0/1/1
     +
     +
    US-R1 (config-router)# passive-interface fa0/0
     +
     +
    US-R2 (config-router)# passive-interface fa0/0
     +
     +
    HQ(config-router)# default-information originate
     +
     +
    US-R1 (config-if)# ip ospf priority 150 (f0/1,s0/0/0)
     +
     +
    US_R2 (config-if)# ip ospf priority 75 (f0/1,s0/0/0)
     +
     +
    US-R1 (config-if)# ip ospf hello-interval 30 (f0/0)
     +
     +
    US-R2 (config-if)# ip ospf hello-interval 30 (f0/1)
     +
     +
    US-R1# show ip ospf neighbor
     +
     +
     +
    -------------------------------------------------------------------------
     +
    WPC2: 172.16.100.190 255.255.255.192 172.16.100.129
     +
     +
    WB1: FA0/1 – 172.16.100.238 255.255.255.240
     +
     +
    net 172.16.100.0 0.0.0.127 area 0
     +
     +
    net 172.16.100.224 0.0.0.15 area 0
     +
     +
    net 172.16.100.244 0.0.0.3 area 0
     +
     +
    passive int f0/0
     +
     +
    int f0/1 ip ospf priority 100
     +
     +
    int s0/0/0 ip ospf priority 100
     +
     +
    int f0/1 ip ospf hello-interval 20
     +
     +
    WB2:
     +
     +
    net 172.16.100.128 0.0.0.63 area 0
     +
     +
    net 172.16.100.224 0.0.0.15 area 0
     +
     +
    net 172.16.100.240 0.0.0.3 area 0
     +
    passive int f0/0
     +
     +
    int f0/1 ip ospf priority 50
     +
     +
    int s0/0/0 ip ospf priority 50
     +
     +
    int f0/1 ip ospf hello-interval 20
     +
     +
    WestHQ:
     +
     +
    ip route 192.168.0.0 255.255.254.0 192.0.0.2
     +
     +
    ip route 0.0.0.0 0.0.0.0 s0/1/0
     +
     +
    net 172.16.100.244 0.0.0.3 area 0
     +
     +
    net 172.16.100.240 0.0.0.3 area 0
     +
     +
    default-information originate
     +
     +
    passive int s0/1/0
     +
     +
    passive int s0/1/1

    Hiện nay

    /si´mestə/

    Thông dụng

    Danh từ

    Học kỳ, lục cá nguyệt (đặc biệt trong các trường đại học và trung học Mỹ)
    the summer semester
    học kỳ mùa hè


    Các từ liên quan

    Từ đồng nghĩa

    noun
    course , period , quarter , session

    US-R2 (config)# int Fa0/0

    US-R2 (config-if)# ip add 192.168.20.65 255.255.255.224

    US-R2 (config-if)# no shut

    US-R2 (config-if)# exit

    US-R2 (config)# int Fa0/1

    US-R2 (config-if)# ip add 192.168.20.113 255.255.255.248

    US-R2 (config-if)# no shut

    US-R2 (config-if)# exit

    US-R2 (config)# int S0/0/0

    US-R2 (config-if)# ip add 192.168.20.242 255.255.255.252

    US-R2 (config-if)# no shut

    US-R2 (config-if)# exit

    US-R2 (config)# int Lo0

    US-R2 (config-if)# ip add 172.16.0.2 255.255.255.255

    US-R2 (config-if)# no shut

    US-R2 (config-if)# exit

    Configure US-PC2 with the last IP address in the subnet.

    Ip address: 192.168.20.94Subnet mask: 255.255.255.224Default gateway: 192.168.20.65

    US-R1 (config)# int Fa0/1

    US-R1 (config-if)# ip add 192.168.20.118 255.255.255.248

    US-R1 (config-if)# no shut

    US-R1 (config-if)# exit

    US-R1# telnet 192.168.20.245

    HQ(config)# ip route 10.10.0.0 255.255.252.0 128.107.25.2

    HQ(config)# ip route 0.0.0.0 0.0.0.0 S0/1/0

    HQ(config)# router ospf 3

    HQ(config-router)# network 192.168.20.244 0.0.0.3 area 0

    HQ(config-router)# network 192.168.20.240 0.0.0.3 area 0

    US-R1 (config)# router ospf 3

    US-R1 (config-router)# network 192.168.20.0 0.0.0.63 area 0

    US-R1 (config-router)# network 192.168.20.112 0.0.0.7 area 0

    US-R1 (config-router)# network 192.168.20.244 0.0.0.3 area 0

    US-R2 (config)# router ospf 3

    US-R2 (config-router)# network 192.168.20.64 0.0.0.31 area 0

    US-R2 (config-router)# network 192.168.20.112 0.0.0.7 area 0

    US-R2 (config-router)# network 192.168.20.240 0.0.0.3 area 0

    HQ(config-router)# passive-interface s0/1/0

    HQ(config-router)# passive-interface s0/1/1

    US-R1 (config-router)# passive-interface fa0/0

    US-R2 (config-router)# passive-interface fa0/0

    HQ(config-router)# default-information originate

    US-R1 (config-if)# ip ospf priority 150 (f0/1,s0/0/0)

    US_R2 (config-if)# ip ospf priority 75 (f0/1,s0/0/0)

    US-R1 (config-if)# ip ospf hello-interval 30 (f0/0)

    US-R2 (config-if)# ip ospf hello-interval 30 (f0/1)

    US-R1# show ip ospf neighbor


    WPC2: 172.16.100.190 255.255.255.192 172.16.100.129

    WB1: FA0/1 – 172.16.100.238 255.255.255.240

    net 172.16.100.0 0.0.0.127 area 0

    net 172.16.100.224 0.0.0.15 area 0

    net 172.16.100.244 0.0.0.3 area 0

    passive int f0/0

    int f0/1 ip ospf priority 100

    int s0/0/0 ip ospf priority 100

    int f0/1 ip ospf hello-interval 20

    WB2:

    net 172.16.100.128 0.0.0.63 area 0

    net 172.16.100.224 0.0.0.15 area 0

    net 172.16.100.240 0.0.0.3 area 0 passive int f0/0

    int f0/1 ip ospf priority 50

    int s0/0/0 ip ospf priority 50

    int f0/1 ip ospf hello-interval 20

    WestHQ:

    ip route 192.168.0.0 255.255.254.0 192.0.0.2

    ip route 0.0.0.0 0.0.0.0 s0/1/0

    net 172.16.100.244 0.0.0.3 area 0

    net 172.16.100.240 0.0.0.3 area 0

    default-information originate

    passive int s0/1/0

    passive int s0/1/1

    Lấy từ « http://tratu.soha.vn/dict/en_vn/Semester »

    tác giả


    Tìm thêm với Google.com :

    NHÀ TÀI TRỢ
Mời bạn chọn bộ gõ Anh Việt
Bạn còn lại 350 ký tự.
X